Users Manual

09 10
Delete camera
Set the sound sensitivity alarm range. This function identifies the volume of the baby' s
crying. When it is above the set threshold, the receiver will sound an alarm.
Sound sensitivity settings
Temperature alarm settings
Middle
Low
High
OK:Sele ct
MENU:Re turn
The digital wireless baby monitor has 5 lullabies. They can help you lull your baby to sleep.
Notice: In the current interface, press
keys to switch lullabies; press keys
to adjust the volume.
3. You can also play music quickly through the music play button on the panel.
OK:Sele ct
MENU:Re turn
Off
OK:Sele ct
MENU:Re turn
OK:Sele ct
MENU:Re turn
OK:Se lect
MENU:Return
≤14
≥29
ON
OFF
°c
°F
OK:Sele ct
MENU:Re turn
OK:Sele ct
MENU:Re turn
1 2
Alarm settings
1. Select Alarm Settings, press OK to enter the settings page, and select “Sound
Sensitivity” settings.
2. Select “Low, Middle, High, Off” as needed and press OK to confirm.
2. Select the channel to be deleted, and press OK to confirm. Then select “Delete Camera”
and press OK to confirm.
Lullabies
1. Select Music Play, and press OK to enter the function.
2. Select the music you want to play, press OK to confirm, and the camera will play the
lullaby of your choice. Press OK again, and the lullaby pauses. Select “All” to play all the
lullabies in a loop. After settings are completed, press MENU to return.
Note: The audible alarm ringing will last for 1 minute. The audible alarm notification can
be turned off by pressing any button on the receiver, and within 3 minutes after turn-off, if
an alarm is triggered again, the receiver will not issue an alarm notification again to avoid
frequent interference.
1. Select Camera, and press OK to enter the function.
When it is too hot or too cold in your baby's room, the temperature alarm will push a
notification to your receiver.
1. Select Alarm Settings, press OK to enter the settings page, and
select “Temperature Alarm” settings.
2. Select “Celsius, Fahrenheit” as needed and press OK to confirm.
3. Select “Alarm” “ON, OFF” as needed.