Users Manual

OK:Sele ct
MENU:Re turn
1 2
07 08
1. Select Camera, and press OK to enter the function.
3. When the device prompts “Start pairing, please press the SET button on the camera.”,
press the SET button on the camera, and at this point, the device enters pairing mode.
After pairing succeeds, the screen will jump to a real-time monitoring screen.
Start pairing, please press
the SET button on the camera.
OK:Sele ct
MENU:Re turn
OK:Select
MENU: Return
Receiver function settings
Functions of the Babysitter is user definable, to best satisfy your demands. Audio and
temperature alarms may offer automatic notification to you. This chapter will introduce the
user-definable settings item by item.
Access receiver menu
In states of live view, press MENU button on the monitor can enter into MENU list;
In states of non-live view, press MENU button on the monitor can return to previous
interface level.
Camera settings (camera pairing and
deletion)
Add camera
2. Select the channel to be paired, and press OK to confirm. Then select “Add Camera”
and press OK to confirm.