Users Manual

03 04
!
27
Signal strength between the receiver and the camera
No signal connection between the receiver and the camera
The Lullaby function is enabled.
The sleep setting of the receiver is enabled.
Displaying current room temperature
Show current battery level
Temperature alarm has been turned on
No camera is added or the camera is disconnected from receiver
Audio alarm
Temperature alarm reminder
Message push icon
Feed reminder has been turned on
Audible alarm has been turned on
Feed alarm reminder
Low battery alarm reminder
Message push icon
Explanation for status indicator LED
The first to the fifth green indicators flash from low to high: indicating the received volume;
the sixth red indicator is steady on: indicating the lithium battery is being charged;
(displayed whether it is powered on or off)
Using the Monitor
Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the
camera lens toward the area you want to monitor.
NOTE:
Do not place the Monitor Unit within baby's reach. If there is interference with the
picture or sound, try moving the units to different locations, and ensure they are
not close to other electrical equipment.
Children have STRANGLED in cords.
Keep this cord out of the reach of children
(more than 3feet(0.9m) away).
Never use extension cords with AC
Adapters.Only use the AC Adapters
provided.