Parts List

09 10
Pairing is OK.
5. When the device prompts “Pairing is Ok”, which indicates that the device is successfully
paired, the menu will skip to the real-time monitoring menu, and the first indicator light of
the receiver is constantly on in green.
Delete the camera
2. Select the channel to be deleted, press OK to confirm, select and press OK to confirm.
Camera is paired. Can be deleted.
3. When the device prompts “Camera is paired. Can be deleted” Press OK to confirm. When
the device prompts “Deleting is OK”, the camera is successfully deleted.
Deleting is OK.
1. Select Icon and press OK to enter.
Set the range of the sound sensitivity alarm. Set the sound sensitivity alarm
range. This function recognizes the intensity of the baby's crying, and when the
value is above the threshold, the receiver will sound an alarm.
Audio alarm settings
Note: The audible alarm will last for 1 minute. The audible alarm notification can be
switched off by pressing any button on the receiver, and the notification will not be received
again within 3 minutes thereafter.
1. Select icon and press OK to confirm
2. Select the 、 、 icon as needed and press OK to confirm.
The audible alarm setting is completed. Press MENU to return.
Temperature alarm settings
The temperature alarm gives a push notification to your receiver when your
baby's room is too hot or too cold.
1. Select and press OK to enter the setting page
Default
Low
High