Parts List

27
Icon Description
Signal strength between the receiver and the camera
No signal connection between the receiver and the camera
The Lullaby function is enabled.
Displaying current room temperature
Indicating current battery level. When the battery is too low,
this icon will change to and flash.
Temperature alarm is enabled
Status Bar Icon
No camera is added or the camera is disconnected from receiver
Temperature alarm
Message push icon
03 04
Explanation for status indicator LED
Using the Monitor
Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point
the camera lens toward the area you want to monitor.
NOTE:
Do not place the Monitor Unit within baby's reach. If there is interference with the
picture or sound, try moving the units to different locations, and ensure they are
not close to other electrical equipment.
Children have STRANGLED in cords.
Keep this cord out of the reach of children
(more than 3feet(0.9m) away).
Never use extension cords with AC
Adapters.Only usse the AC Adapters
provided.
The first green indicator is steady on: indicating successful connection between the
camera and the receiver.
The first to the fifth green indicators slowly flash simultaneously: indicating power on,
but camera not connected.
The second to the fifth green indicators slowly flash from low to high: indicating the
received volume
The second to the fifth green indicators slowly flash simultaneously: indicating that the
alarm signal is received.
The sixth red indicator is steady on: indicating that the lithium battery is being charged;
(displayed whether it is turned on or off)
The sixth red indicator is off: indicating that the battery is fully charged.