User Manual

5
INSTRUCTIONS GUIDE
Using the USB Input
Insert a USB drive to Play Music Automatically. Select and press the MODE button repeatedly on
the remote control until in USB mode or press the Mode button repeatedly on the sound bar to
enter USB mode. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the
remote control. Audio played through the connected USB device will now be heard.
Using the RCA Input
Use an RCA Stereo Audio Cable (included) to connect to the TV's stereo RCA (L/R) audio output
sockets. Connect the audio output cable of the soundbar via the 'RCA input sockets of the unit.
Then press MODE on the remote control or press the Mode button on the unit to scroll to the
RCA function. Turn on your television.
Troubleshooting: If you are not receiving a picture or encountering interference, please ensure
that the RCA cable is being connected to the 'output 'RCA port on your TV set. This will ensure
that the sound is being exported correctly. If your TV does not have 'output' RCA port, please use
an alternative connection method.