Instructions Guide
Table Of Contents
- Side View/Control Buttons
- Back View
- Remote Control
- Using the Remote Control
- Box Contents
- Support
- Using the AUX IN Cable
- Using the ARC Input
- Using the Optical Input
- Using the MP3 Link Connection (Line In)
- Connecting to the Mains Supply
- Using the Bluetooth Operation
- Playing Audio Wirelessly
- Using the USB Operation
- Using the FM Mode
- Troubleshooting
- Specifications
- 空白页面
O
P
T
I
C
A
L
Instructions Guide
Using the Optical Input
You will need: An audio source with an Optical Audio Output and a Digital
Optical Audio cable (included).
Connect the Digital Optical Audio cable to the optical output
on the audio source and to the Optical Input on the soundbar.
Press the POWER button on the sound bar or POWER button
directly on the remote control (Ref.10
)
to switch on the unit.
Press the MODE button on the remote control (
Rem.18
)to
switch to Optical mode or select the Mode button on main
unit repeatedly to select the Optical mode.
Using the native controls on your connected device, make sure
the audio settings are set to PCM or Optical Audio and are
turned On. Audio from the connected audio source will now be
played through the speakers.
OPTICAL cable
Rear view of the unit
8
OPTICAL IN