G S - S B 60 5.
Contents Controls And Functions ---------------------------------------1-8 What’s In The Box? -------------------------------------------- 9 Support ----------------------------------------------------------- 10 Instructions Guide --------------------------------------------- 11-18 Using the AUX IN Cable ------------------------------------11 Using the HDMI (ARC) Input ------------------------------12 Using the Optical Input ------------------------------------13 Using the MP3 Link Connection (Line In) ----
Controls And Functions Side View/Control Buttons 1. Power On/Off 2. Source 3. Volume-/Previous 4. Volume+/Next Back View 5. 6. 7. 8. DC Power Input AUX-In Input Line-In Input Optical Input 9. ARC Input 10.
Controls And Functions Remote Control 2
Controls And Functions Remote Control 1. Soundbar Power On/Off Short press the button to turn on/off 2. Saterliter Power On/Off Short press the button to turn on Long press the button to turn on 3. S.VOL (Volume + for Wireless Surround) Press to increase the volume for wireless surrounds 4. CEN.VOL (Volume + for Center Tone) Press to increase the volume for center tone 5. F.VOL (Volume + for Front Tone) Press to increase the volume for front tone 6. SUB.
Controls And Functions Remote Control 11. 12. Bass Increase Press to increase the bass Treble Increase Press to increase the treble 13. Master.VOL (Master Volume+ for the Press to increase the volume for the whole kit 14. 15. 16. 17. 18. 19. 20. 21. Whole Kit) Back Step (Previous) Use in AUX In, Line In or Bluetooth mode to go back a track Forward Step (Next) Use in AUX In, Line In or Bluetooth mode to go forward a track Master.
Controls And Functions Remote Control 22. 23. 24. 25. 26. 27. 28. 29. 30. 31.
Controls And Functions Using the Remote Control The remote control sensor at the front of the soundbar is sensitive to the remote control’s commands up to a maximum of 8 metres away and within a maximum arc of 30 degrees. Please note that the operating distance may vary depending on the brightness of the room.
Controls And Functions Subwoofer 5.25 Inch Wireless Subwoofer 1. Power Switch 2.
7 Controls And Functions Wireless Surround Speaker 2 pieces Wireless Surround Speaker Detachable Surround Speaker from main Soundbar to be Standing Speaker, power supported by DC 3.7V / 4000mA built-in battery. Power of Surround Speaker is supporting charged by main soundbar directly, it can also be charged with a DC 5V power supply after disassembly. The battery has an overcharge protection function.
What’s In The Box? Box Contents 1. 2. 3. 4. 5. 6. GS-SB60 Soundbar Remote Control Power Adapter x 4 AUX IN Cable 3.5mm to 3.5mm Line In Cable User Manual 7. Surround 8. Subwoofer 9. Aluminium Pedestal 10. Side cover accessories 1. GS-SB60 Soundbar 2. Remote Control 3. Power Adapter 7.Surroundx2 4. AUX IN Cable 8. Subwoofer x 1 5. 3.5mm to 3.5mm Line In Cable 9. Aluminium Pedestal 6. User Manual 10.
Support Support Thank you for your purchasing the GS-SB60 Soundbar. Please follow the guidance of the user manual to set up your new purchase and begin enjoying its features.
Instructions Guide Using the AUX IN Cable Use the AUX Stereo Audio Cable (included) to connect the TV’s stereo AUX (L/R) audio output socket. Connect the audio output cable of the soundbar via the ‘AUX’ input sockets of the unit. Press the POWER button on the soundbar or POWER button directly on the remote control (Rem.1) to switch on the unit. Then press MODE on the remote control (Rem.26) or press the Mode button on the unit to scroll to the AUX IN function.
Instructions Guide Using the HDMI ARC Input You will need: An audio source with an ARC Audio Output and a ARC Audio cable (not included). Connect the ARC Audio cable to the ARC output on the audio source and to the ARC Input on the soundbar. Press the POWER button on the soundbar or POWER button directly on the remote control (Rem.1) to switch on the unit. Long press (2-3 seconds)the MODE button on the remote control (Rem.
Instructions Guide Using the Optical Input You will need: An audio source with an Optical Audio Output and a Digital Optical Audio cable (not included). Connect the Digital Optical Audio cable to the optical output on the audio source and to the Optical Input on the soundbar. Press the POWER button on the sound bar or POWER button directly on the remote control (Rem.1) to switch on the unit. Press the MODE button on the remote control (Rem.
Instructions Guide Using the MP3 Link Connection (Line In) Plug one end of a 3.5mm to 3.5mm Line In cable (included) into the Line In port on the unit. Before use, disconnect any cables connected to the Stereo RCAInputs. Plug the other end of the cable into the audio output/ headphone output on an MP3 player or other audio source. Press the Power button on the soundbar or POWER button directly on the remote control (Rem.1)to switch on the unit.
Instructions Guide Connecting to the Mains Supply Ensure that the power supply voltage is in the voltage of 100V~240V. This unit is designed to use adapter. Connecting the unit to any other power source may cause damage to the unit. Unwind the mains cable to its full length. Connect the mains plug to a mains socket. Make sure the mains plug is fully inserted into the mains socket. Connect the adapter to the unit via the DC input Socket.
Instructions Guide Using the Bluetooth Operation Pairing a Bluetooth Device for the First Time Press the POWER button on the unit or the POWER button on the remote control (Rem.1) to switch on the unit. Select and press the MODE button repeatedly on the remote control until in Bluetooth mode (Rem.21)or press the Mode button repeatedly on the sound bar to enter Bluetooth mode. Using the native controls on your Bluetooth device, select the “GS-SB60” in your Bluetooth settings to pair.
Instructions Guide Playing Audio Wirelessly Follow the instructions for pairing a Bluetooth device. Use the native controls on the connected Bluetooth Device to select a track. To Play/Pause the track or Skip Forwards/Backwards to a selected track, use the remote control (Rem.17,14,15). Audio played through the connected Bluetooth device will now be heard through the speakers. Using the USB Operation Insert USB to Play Music Automatically.
Troubleshootingg Troubleshooting If the soundbar does not work properly as desired, please check the following. Malfunction Possible causes/measures No power / function Check whether the power is switched on or off at the wall. Check whether the power adaptor is properly connected to power outlet or not. No sound Check whether cables are properly installed. If they are, please try alternative cable to connect to your TV if possible. Check unit is out of standby and in mode.
Specifications Power Supply (Soundbar) DC 24V / 2.0A Power Supply (Subwoofer) DC 18V / 1.3A Power Supply (Surround Speaker) DC 5V / 2A Power Supply (Surround Speaker) DC 3.7V / 4000mA Built-in Battery Surrounds Built-in Battery Playing Time 4 Hours (at maximum volume) Power Consumption 100W Power Output 180W Speaker Size & Number of Speakers (Soundbar) 2.25'' Full Ranges Speaker x 2 + 2.25’’ Mid-Tweeter x 4 Speaker Size (Subwoofer) 5.
Quick System Installation Guide Place the paper guide on the wall where you want to hang the soundbar. Locate the screw holes on the paper guide and mark a point with a pencil. Verify with a level gauge that the inclination angle of the soundbar is zero degrees. Make the holes with the corresponding drill bit according to the type of wall.
Quick System Installation Guide When all the kits connecting with power supply, the subwoofer is flat placed in the middle under the soundbar, or placed closely on the left and right side of the soundbar, but not too far from the soundbar. Detached Surround Speaker from main Soundbar to be Standing Speaker. Each wireless surround speaker is flat placed on the left and right sides of the sofa, their speakers are facing right and left ears of people setting on the sofa.
Safety Information 1. 2. 3. 4. 5. 6. Read these user manual. Keep these user manual. Heed all Warnings Follow all instructions Do no clean the apparatus near or with water Do not block any ventilation openings. Install in accordancewiththemanufacturer’sinstructions 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
