Instruction Manual

Instruction Manual
WD22
1 x Wireless Charging Pad
1 x USB to Micro-USB charging cable
1 x Instruction Manual
Input power: DC 5V/1500 mA
Output power: 5W
Product size: 69 x 9 mm
30cm standard white color Micro-USB cable
Use a certied USB adapter, connect the
provided Micro-USB cable to the USB adapter.
Use Micro-USB tip to connect to the input port
on the charging pad.
Charging mobile devices:
Check your phone or tablet supporting
with wireless charging, it will be listed in the
manufacturer’s specications.
Simply place the enabled device atop the
wireless charging pad. Your device should
show the charging indication.
When completely charged, remove the device
from the charging pad.
Note: In order to charge devices, use only the
accessory cable or the cable included with your
own device by the manufacturer.
WARNING–When using this product, basic
precautions should always be followed,
including the following:
Read all the instructions before using the
product.
To reduce the risk of injury, close supervision
is necessary when the product is used near
children.
Do not expose the device to moisture.
Do not use the device in excess of its output
rating. Overload outputs above rating may
result in a risk of re or injury.
Do not use the device if damaged or modied.
Damaged or modied batteries may exhibit
unpredictable behavior resulting in re,
explosion or risk of injury.
Do not disassemble the device. Take it to a
qualied service person when service or repair
is required. Incorrect reassembly may result in
a risk of re or injury.
Do not expose the device to re or excessive
temperature. Exposure to re or temperatures
above 212ºF may cause explosion.
Have servicing performed by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
Do not overcharge phone. Unit may get hot with
excessive use. Remove phone when it is fully
charged. Never charge for more than 7 hours at a
time.
Attachements on the back of your phone can
impede the effectiveness of the wireless charger,
and lead to overheating. Please remove attachments
from the phone before charging on this device.
1.
a.
b.
2.
a.
b.
c.
*
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
1.
2.
3.
4.
5.
•
•
•
•
A smartphone
Wireless Charging Pad
Built-in Wireless Charger
Power Indicator
Charging Input Port
What’s included:
Tech Specica
tions
Instructions:
SAFETY PRECAUTIONS:
1
2
4
3
5
12.
13.
Caution: Changes or modifications not expressly
approved by the party responsible for compliance
could void your authority to operate the equipment.
The device has been evaluated to meet general RF
exposure requirement.
The distance between user and products should be
no less than 20cm.
*