User's Manual

7
NMK: The NMK button is used to set the membership state.
Pressing and holding the NMK buttons for more than 10
seconds which randomizes the NMK value.
Pressing and holding the NMK button for greater than 3
seconds, which becomes a member of existing AVLN.
3.3 LEDs on the Adapter
All LEDs on the adapter are located on the front panel. There are 3
LEDs to indicate the status of the adapter.
Power: Green. It lights up when the Adapter is powered on.
Ethernet: Green. It flashes to indicate activity over the
Ethernet connection.
Data: Green. It flashes to indicate activity over the powerline
connection
.