User's Manual

6
2 Hardware Installation
Step 1 Connect the Line interface of the device and the Modem interface of
the splitter through a telephone cable. Connect the phone to the
Phone interface of the splitter through a cable. Connect the incoming
line to the Line interface of the splitter.
The splitter has three interfaces:
 Line: Connect to a wall phone jack (RJ-11 jack)
 Modem: Connect to the ADSL jack of the device
 Phone: Connect to a telephone set.
Step 2 Connect the Ethernet interface of the device to the network card of the
PC through an Ethernet cable (MDI/MDIX).
I Note:
Use twisted-pair cables to connect with the hub or switch.
Step 3 Plug one end of the power adapter to the wall outlet and connect the
other end to the Power interface of the device.
Connection 1
錯誤
錯誤錯誤
錯誤! 找不到參照來源
找不到參照來源找不到參照來源
找不到參照來源。
。。
。 displays the application diagram for the connection of
the router, PC, splitter and the telephone sets, when no telephone set is placed
before the splitter.