User's Manual

Interface

Description

ON/OFF Power switch, power on or power off the router.

1.3 System Requirements

Recommended system requirements are as follows:

 A 10/100 base-T Ethernet card is installed on your PC

 A hub or Switch. (attached to several PCs through one of Ethernet

interfaces on the device)

 Operating system: Windows 98SE, Windows 2000, Windows ME,

Windows XP or Windows Vista

 Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or firefox 1.5 or

higher

1.4 Features

The device supports the following features:

 Various line modes (line auto-negotiation)

 External PPPoE dial-up access

 Internal PPPoE/PPPoA dial-up access

 Zero installation PPP bridge mode (ZIPB)

 1483B/1483R/MER access

 Multiple PVCs (eight at most)

 A single PVC with multiple sessions

 Multiple PVCs with multiple sessions

 DHCP server

 NAT/NAPT

 Static route

 Firmware upgrading through Web, TFTP, or FTP

 Rsetting to the factory defaults through Reset button or Web

 DNS relay

 Virtual server

 Web interface

 Telnet CLI

 System status display