User's Manual

62
Field Description
Apply Click it to save the settings of this page.
Interface The router interface that uses RIP.
Recv Version The interface type to accept RIP messages. You can
choose RIP1, RIP2, or Both.
 Choose RIP1 indicates the router receives RIP v1
messages.
 Choose RIP2 indicates the router receives RIP v2
messages.
 Choose Both indicates the router receives RIP v1
and RIP v2 messages.
Send Version The working mode for sending RIP messages. You can
choose RIP1 or RIP2.
 Choose RIP1 indicates the router broadcasts RIP1
messages only.
 Choose RIP2 indicates the router multicasts RIP2
messages only.
Add Click it to add the RIP interface to the Rip Config Table.
Delete Select a row in the Rip Config Table and click it to
delete the row.
Rip Config Table A list of the router interfaces that enble RIP.
3.6.3 Port Mapping
Choose Advance > Port Mapping. The page shown in the following figure
appears. In this page, you can bind the WAN interface and the LAN interface to
the same group.