User's Manual

61
Click Show Routes. The table shown in the following figure appears. The table
shows a list of destination routes commonly accessed by your network.
3.6.2.2 RIP
Click RIP in the left pane. The page shown in the following figure appears. If you
are using this device as a RIP-enabled router to communicate with others who is
using the Routing Information Protocol (RIP), enable the RIP. This page is used
to select the interfaces on your devices that use RIP, and the version of the
protocol used.
The following table describes the parameters and buttons of this page:
Field Description
RIP Select On, the router communicates with other
RIP-enabled devices.