User's Manual

Field Description

Services Allowed

You can choose the following services from LAN or

WAN: web, telnet, ftp, tftp, snmp, or ping. You can

also choose all the services.

Add

After setting the parameters, click it to add the

Current ACL Table.

Reset Click it to refresh this page.

3.6 Advance

In the navigation bar, choose Advance. The Advance page that is displayed

contains Bridge Setting, Routing, Port Mapping, QoS, SNMP, and Others.

3.6.1 Bridge Setting

Choose Advance > Bridge Setting. The page shown in the following figure

appears. This page is used to configure the bridge parameters. In this page, you

can change the settings or view some information in the bridge mode and its

attached ports.

The following table describes the parameters and buttons of this page:

Field Description

Aging Time If the host is idle for 300 seconds (default value), its

entry is deleted from the bridge table.

802.1d Spanning

Tree

You can select Disable or Enable.

Select Enable to provide path redundancy while