User's Manual

3
LEDs Color Status Description
On
The device has successful WLAN
connection.
Blinks Data is being transmitted on WLAN.
WLAN Green
Off The WLAN connection is failed.
Off WPS is disabled.
WPS Green
Blinks
WPS is enabled, and is waiting for
client to negotiate.
Rear Panel
The following table describes the interfaces of the device:
Interface Description
Wireless antenna.
Line
RJ-11 interface, for connecting to the ADSL interface or a
splitter through a telephone cable.
LAN1/LAN2/
LAN3/LAN4
RJ-45 interface, for connecting to the Ethernet interface of
the PC or the Ethernet devices through an Ethernet cable.
Power
Power interface, for connecting to the power adapter of 12 V
DC, 1 A.
Reset
Reset to the factory defaults. To restore factory defaults, keep
the device powered on and push a paper clip into the hole.
Press down the button 3 seconds and then release.
WPS/WLAN
 Press the button silently less than 1 second to enable
WLAN function.
 Press the button for more than 3 seconds (include 3
seconds) to enable to enable WPS function.
 If you press the button between 1 second and 3
seconds, no function takes effective.