User's Manual

The following table describes the parameters of this page:

Field Description

Service Type

You can choose the common service type, such as

AUTH, DNS, or FTP. You can also define a service

name.

 If you choose the common service type, the

corresponding WAN communication

port/service host communication port has the

default settings.

 If you define service type, you need to enter the

corresponding port.

Protocol

Choose the transport layer protocol that the service

type uses. You can choose TCP or UDP.

WAN Setting You can choose Interface or Ip Address.

WAN Interface Choose the router port that uses virtual server.

WAN Port Enter the access port on the WAN.

LAN Open Port Enter the port number of the specified service type.

LAN Ip Address

Enter the IP address of the virtual server. It is in the

same network segment with LAN IP address of the

router.