User's Manual

34
Field Description
this PPP interface (VPI/VCI).
Login Name The login name provided by your ISP.
Password The password provided by your ISP.
Authentication Method You can choose AUTO, CHAP, or PAP.
Connection Type You can choose Continuous, Connect on
Demand, or Manual.
Idle Time (s) If choose Connect on Demand, you need to
enter the idle timeout time. Within the preset
minutes, if the router does not detect the flow of
the user continuously, the router automatically
disconnects the PPPoE connection.
Bridge You can choose Bridged Ethernet, Bridged
PPPoE, or Disable Bridge.
AC-Name The accessed equipment type.
Service-Name The service name.
Apply Changes Click it to save the settings of this page.
Return Click it to return to the WAN Interface page.
Undo Click it to refresh this page.
3.4.2.2 ATM Setting
Click ATM Setting in the left pane. The page shown in the following figure
appears.
In this page, you can configure the parameters of the ATM, including QoS, PCR,
CDVT, SCR, and MBS