User's Manual

32
Field Description
PPP Settings
User Name
The correct user name that your ISP has
provided to you.
Password
The correct password that your ISP has
provided to you.
Type
You can choose Continuous, Connect on
Demand, or Manual.
Idle Time (min)
If select connect on demand, you need to
enter the idle timeout time. Within the preset
minutes, if the router does not detect the flow
of the user continuously, the router
automatically disconnects the PPPoE
connection.
WAN IP Settings
Type
You can choose Fixed IP or DHCP. If select
fixed IP, you should enter the local IP
address, remote IP address and subnet
mask. If set to use DHCP, the router is a
DHCP client, the WAN IP address is
assigned by the remote DHCP server.
Local IP Address
It is the IP address of WAN interface that is
provided by your ISP.
Remote IP Address
This is the gateway IP address that is
provided by your ISP.
Netmask It is the subnet mask of the local IP address.
Unnumbered
Select this checkbox to enable IP
Unnumbered function.
Add
After configuring the parameters of this page,
click it to add a new PVC into the current ATM
VC table.
Modify
Select a PVC in the current ATM VC table,
then modify the parameters of this PVC. After
finishing, click it to apply the change of this
PVC.