User's Manual

27
Field Description
Show Client
Click it, the Active DHCP Client Table page appears.
It shows the assigned IP address of the clients.
Default
Gateway
Enter the IP default gateway of the IP address pool.
Max Lease
Time
The lease time determines the period that the PCs
retain the assigned IP addresses before the IP
addresses change.
Domain Name
Enter the domain name if you know. If you leave this
blank, the domain name obtained by DHCP from the
ISP is used. You must enter host name (system name)
on each individual PC. The domain name can be
assigned from the router through the DHCP server.
Set
VendorClass IP
Range
Click it, the Device IP Range Table page appears. You
can configure the IP address range based on device
type.
Click Show Client in the DHCP Settings page. The page shown in the following
figure appears. You can view the IP address assigned to each DHCP client.
The following table describes the parameters and buttons in this page:
Field
Description
IP Address
It displays the IP address relative to the MAC
address.
MAC Address
It displays the MAC address of the PC.
Each Ethernet device has a unique MAC address.
The MAC address is assigned at the factory and it
consists of six pairs of hexadecimal character, for