User's Manual

3.4.1 LAN

Choose Network > LAN. The LAN page that is displayed contains LAN IP,

DHCP, and DHCP Static IP.

3.4.1.1 LAN IP

Click LAN IP in the left pane. The page shown in the following figure appears.

In this page, you can change IP address of the router. The default IP address is

192.168.1.1. This is the private IP address of the router. This is the address

under which the router can be reached in the local network. It can be freely

assigned from the block of available addresses.

The following table describes the parameters and button of this page:

Field Description

IP Address

Enter the IP of LAN interface. It is recommended to

use an address from a block that is reserved for

private use. This address block is 192.168.1.1-

192.168.255.254.

Subnet Mask

Enter the subnet mask of LAN interface. The range

of subnet mask is from

255.255.0.0-255.255.255.254.

Secondary IP

Select it to enable the secondary LAN IP. The two

LAN IP addresses must be in the different network.

IGMP Snooping You can disable or enable IGMP Snooping.

Apply Changes Click it to save the settings of this page.