User's Manual

Field

Description

ISP. You can select LLC/SNAP or VC-Mux.

Channel Mode

Select the WAN connection type. You can select 1483

Bridged, 1483 MER, PPP over Ethernet (PPPoE),

PPP over ATM (PPPoA), or 1483 Routed.

PPP Settings

The username and password apply to PPPoE and

PPPoA encapsulation only. Ensure that you enter the

correct username and password.

Default Route

You can select Enable or Disable.

DNS Settings

 Obtain DNS Automatically: Obtain the DNS

server assigned by the uplink equipment, such as

BAS.

 Use the following DNS server address: If you

want to enter the DNS server address by yourself,

select it and enter the related data.

After finishing the configuration, click NEXT. The page shown in the following

figure appears.

The following table describes the parameters of this page:

Field

Description

WLAN

Interface

You can choose Enable or Disable. By default, WAN

interface is enabled.

You need to enable WAN interface, and then you can