User's Manual

14
HT Physical Mode
Click Cancel to clear the settings, click Apply to save the settings.
Advaced Wireless Settings
Use the Advanced Setup page to make detailed settings for the Wireless. Advanced Setup includes items
that are not available from the Basic Setup page, such as Beacon Interval, Control Tx Rates and Basic
Data Rates.
Basic Data Rate
Choose between the following data rates 1, 2, 5.5, 11, 6, 9 , 12, 18, 24, 36, 48,54 and auto. Default
is auto.
Beacon Interval
The interval time between 20ms and 500ms for each beacon transmission. The default is 100ms.
Data Beacon Rate (DTIM)
The Delivery Traffic Indication Message. Specify the data beacon rate between 1 and 255. Default is 1.
Fragment Length
The maximum packet size is used for fragmentation. Packets larger than the size programmed in this
field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value.
The default is 2346.
RTS Threshold
Request to send threshold. The packet size that is used to determine if it should use the CSMA/CA
mechanism or the CSMA/CD mechanism