User's Manual

5. Time alarm setting of probe 1, 2, 3 or 4: Press the button to edit the alarm, then set the time alarm
which is available from 00 Hour 01 Minute to 23 Hours 59 Minutes. The alarm reminder will be
triggered when the set time is over.
When the alarm goes on, your phone will ring and the device will alarm for 60 seconds until it returns to
the normal range. The alarm can be turned off by pressing any buttons on the device or setting on the
APP. After the alarm goes off, the alarm will continue only when the temperature returns to the normal
range and exceed the alarm temperature setting.
HOW TO MAKE A COOKING RECORD
1. Click the button on the APP, then click P1, P2, P3 or P4 where shows a button of ‘Generate
record’ on the top right corner, to start record the temperature curve.
2. Then click the button ‘End record’ to end which will be automatically saved in the ‘Record’.
3. To check the record saved, click the button ‘Record’ to review the History Records or add your
Favorite Records as needed.
Troubleshooting
No display of temperature Check whether the probes are inserted.
Display screen not working
Make sure the device is turned on.
Device may need to be charged.
“Low battery” indicator blank Device may need to be charged.
Cleaning & Maintenance
1. Do not disassemble the product, which may cause product damage.
2. Always wear a heat resistant glove to touch the probe sensors or wires during or just after
cooking. Do not touch with bare hand.
3. Keep the stainless steel probe sensors and wires away from children.
4. Clean the stainless steel probes and dry thoroughly after each and every use. Wash the metal probe
tips with hot soapy water and dry thoroughly. Clean the product by wiping with a soft cloth.
5. Do not immerse the product into water while cooking and cleaning. Do not use the device in the
rain.
6. Do not drop the product or force it to sudden shock or impact.
7. The probes are only waterproof for the part of steel tube, do not expose the plugs of the stainless
steel probes or the jack holes of the device to water or any liquid. This will result in a bad
connection and/or faulty readings.
8. Do not expose the device to direct heat or heat surface. Do not use stainless steel probes in
microwave ovens.