User's Manual

The user interface of the APP may be changed when updates. Please follow the instructions in the
APP.
HOW TO USE THE APP
1. Setting : Press the button in APP to choose °F or °C as the temperature unit.
2. Probes setting: Click the displayed ‘Set up the probe’, set up different meats types and temperature, or
add needed food types of P1 and P2 separately.
3. Temperature trend checking: Press the button on the left bottom of APP to check the trend of
cooking temperature.
4. Temperature alarm setting: Log in Tuya Smart APP, press the button to edit the temperature,
available from -20°C to 300°C (-4°F~572°F). The internal temperature will be triggered by a certain
temperature value.
5. Time alarm setting of probe 1 or probe 2: Press the button to edit the alarm, then set the time alarm
which is available from 00 Hour 01 Minute to 23 Hours 59 Minutes. The alarm reminder will be
triggered when the set time is over.
When the alarm goes on, your phone will ring and the device will alarm for 60 seconds until it returns to
the normal range. The alarm can be turned off by pressing any buttons on the device or setting on the
APP. After the alarm goes off, the alarm will continue only when the temperature returns to the normal
range and exceed the alarm temperature setting.
HOW TO MAKE A COOKING RECORD
1. Click the button in the APP, then click P1 or P2 where shows a button of ‘Generate record’ on the
top right corner, to start record the temperature curve.
2. Then click the button ‘End record’ to end which will be automatically saved in the ‘Record’.
3. To check the record saved, click the button ‘Record’ to review the History Records or add your
Favorite Records as needed.
Troubleshooting
Display ‘LLL’
The probes are not inserted or the measured temperature
is lower than its measuring range.
Display ‘HHH’
The probes are not installed correctly or the measured
temperature is higher than its measuring range.
No display of temperature Check whether the probes are inserted.
Display screen not working
Make sure the battery is installed correctly.
Battery may need to be replaced.
“Low battery” indicator flashing Battery may need to be replaced.