User's Manual

INSTALLING BATTERIES
1. Open the battery compartment cover located at the bottom of the device by pushing the
elastic clasp.
2. Installing two AAA batteries according to the polarity sign shown in the battery
compartment.
3. Close the ba
ttery compartment cover back in place.
HOW TO USE THE DEVICE
1. Take off the protective film on the LCD panel.
2. Turn on the device by pressing the button.
3. To recognize probe 1 and probe 2 easily, insert the orange probe plug into the jack hole marked ① on
the left of device, and insert the yellow probe plug into the jack hole marked ② on the right of device.
4. Press the button to light the LCD.
5. Download and install the APP for free. Search the keyword ‘Tuya Smart’ in Appstore or Google Play,
or scan the following QR Code with your phone.
6. Turn on the blue-tooth switch and Location System of your phone.
7. Long-press the button on the device for 3 seconds until the device beeps with the sign flashing
meanwhile the notification tone on your phone beeps.
8. Launch the APP, click the button at the top right corner to manually add the device, which will be
matched automatically and immediately, then follow the instructions to pair and activate the APP. The
sign will not flash until the device is successfully matched with the APP.
9. When the device is disconnected with the APP, the sign disappears and the notification tone on
your phone beeps.
Once Paired the device with your phone successfully, you don’t need to do it again, unless you
change to other phones. Every time you use the button to match the APP, the sign flashes
until successfully matched.
ENJOY YOUR BARBECUE TIME
Choose food type and doneness for the food when each probe is inserted, the APP will display its
current and target temperature. See the user interface below for more details.