User's Manual

正面
背面
Smart Wireless Meat Thermometer User Manual
FEATURES
Dual probes technology, monitor two different meats
simultaneously, available for the grill, oven and smoker.
Programmed with preset USDA approved temperatures for
different types of meat in APP.
Programmed with preset USDA approved doneness levels for
different types of meat in APP.
Display the preset type of meat and doneness levels of dual
probes in APP.
User can define to add different meat types and alarm
temperature in APP.
Resolution: 1°.
Measurement range: -20°C~300°C (-4°F~572°F).
Measurement accuracy: ±1°C (±2°F) at -20°C~150°C (-4°
~302°F).
Fahrenheit and Celsius switchable.
Low battery indicator.
Max wireless transmission distance is 55m/180 ft (open filed).
Automatic shut-off after 5 minutes if the two probes are not
inserted or automatic shut-off after 10 minutes if the measured
temperature is stable within 3°C (6°F) below 50°C (122°F) with
probes in.
Probes and wire can withstand temperature up to 380°C (716°F).
DEVICE STETCH
Probe 1 act ual
cooking temp
Probe 2 actual
cooking temp
FRONT
BACK
Backlight
Magnet
Battery
compartment
SIDE
stand
BUTTON FUNCTION
Press this button once to turn the device on/off.
In normal mode, press this button to turn the
backlight on/off.
In normal mode, long-press this button for 2
seconds to pair the device with the APP.
INSTALLING BATTERIES
1. Remove the battery compartment cover located at the bottom of
the device by pushing the elastic clasp.
2. Installing two AAA batteries according to the polarity sign
shown in the battery compartment.
3. Close the battery compartment cover back in place.
HOW TO USE THE DEVICE
1. Take off the protective film on the front panel.
2. Turn on the device by pressing the button.
3. Plug the probes into the socket of probe1 and probe 2
respectively, the LCD will display the temperature of probe1 and
probe 2 immediately.
4. Press the button to light the LCD.
5. Download and install the APP for free. Search the keyword
‘Tuya Smart’ in Appstore or Google Play, or scan the following QR
Code with your phone.
6. Turn the blue-tooth switch and Location System of your phone
on.
7. Long-press the button on the device for 2 seconds until it
beeps.
8. Launch the APP, click the button at the top right corner to
manually add the device, which will be matched automatically and
immediately, then follow the instructions to pair and activate the
APP.
Once Paired the device with your phone successfully,
you don’t need to do it again, unless you change to other
phones.
ENJOY YOUR BARBECURE TIME
Choose food type and doneness for the food where each probe is
inserted, the APP will display its current and target temperature.
See the user interface below for more details.
The user interface of the APP may be changed when
update. Please follow the instructions in the APP.
HOW TO USE THE APP
1. Setting : Press this button in APP to choose °F or °C as the
temperature unit.
2. Temperature alarm setting: Log in Tuya Smart APP, press the
button to edit the temperature available from -20°C to 300°C (-
4°F~572°F).
3. Time Alarm setting: Press the button to edit the alarm time
available from 00 Hour 01 Minute
to 23 Hour 59 Minute to trigger alarm reminder when the set time is
over.
4. Probes setting: Click the displayed ‘Set up the probe’, set up
different meats types and temperature, or add needed food types of
P1 and P2 separately.
5. Temperature curve checking: Press the temperature on the left
bottom of APP to check the trend of cooking temperature .
HOW TO MAKE A COOKING RECORD
1. Click the temperature button on the APP, then click P1 or P2
where shows a button of ‘Generate record’ on the top right corner,
to start record the temperature curve.
2. Then click the button ‘End record’ to end which will be
automatically saved in the ‘Record’.
3. To check the record saved, click the button ‘Record’ to review the
History Record or add your Favorite Records as needed.
HOW TO ALARM
When the alarm goes on, your phone will ring and the device
will alarm for 60 seconds until it returns to the normal range.
The alarm can be turned off from pressing any buttons on the
device or setting on the APP. After the alarm goes off, the
alarm will continue only when the temperature returns to the
normal range and exceeding the alarm temperature setting.
No display of temperature
Check whether the probes are inserted.
Display screen not working
Make sure the battery is installed correctly.
Battery may need to be replaced.
“Low battery” indicator flashing
Battery may need to be replaced.
TROUBLESHOOTING
CLEANING & MAINTENANCE
•Do not disassemble the product, which may cause product
damage.
•Always wear a heat resistant glove to touch the probe sensors
or wires during or just after cooking. Do not touch with bare
hand.
•Wash the metal probe tips with hot soapy water and dry
thoroughly. Do not immerse the product into water while
cleaning.
•Clean the product by wiping with a soft cloth.
•Do not drop the product or force it to sudden shock or impact.
•The probes are only waterproof for the part of steel tube, do
not immerse the wire or the plug into water.
•Do not put it into the dishwasher.
Temp
108A-1 108A-2 108A-3
108A-4 108A-5
成品尺寸80*160MM（红色外框线不要）