User Manual

14 SWAGTRON

T5 Sport HoverboardEnglish

Bluetooth

Specification Bluetooth

V2.1+EDR

Speaker Specification 4 3W/2 5W

In order to properly connect to the app, Bluetooth

V4.0 is required from your mobile device.

Notes:

+ The SWAGTRON

will make different sounds to indicate different states:

1.) On and awaiting connection

2.) Connection/pairing successful

3.) Connection terminated

+ Powering on the SWAGTRON

will automatically enable Bluetooth

i.e. Bluetooth

will become enabled and

stay enabled as long as the SWAGTRON

is powered on.

+ Some mobile devices immediately become “discoverable” once Bluetooth

is activated. Please check the

instructions of your Bluetooth

-enabled device for any trouble with this feature.

+ As with most Bluetooth

devices, it is recommended to keep the connected devices within a reasonable

distance from one another. The connection may be terminated or fail to work properly if the connected

devices are too far apart.

19SWAGTRON

T5 Sport Hoverboard English

STEP 3. While the SWAGTRON

remains level, hold the POWER BUTTON down to turn on the unit and keep

holding the button down.

STEP 4. Wait an additional 6 seconds and you will hear a single beep. Release the POWER BUTTON and the front

LEDs will begin flashing.

STEP 5. Press the POWER BUTTON again to turn the SWAGTRON

off.

STEP 6. Press the POWER BUTTON to turn again on your newly calibrated SWAGTRON

unit.

If the SWAGTRON

is still not calibrated correctly, repeat step 1 to 6 or contact customer support for

additional assistance.

T5 Sport_0703_en.indd Spread 14 of 16 - Pages(14, 19)

10/23/2017 4:11:32 PM