User's Manual

Note: After the Controller enters Pairing Mode, it will be in sleep mode automatically without
synchronization within 3.5 minutes; long press the Pairing Button for 3 seconds to enter the Pairing Mode,
short press is the Reset function, when the Controller function is out of order or crashes, short press this
Button to reset the Controller.
Bluetooth Android Mode:
Press A + HOME for 2 seconds to enter the Bluetooth Search Mode, LED2+LED3 flash quickly during
pairing, and the LED2+LED3 indicators light up when the connection is successful.
2.4G D-INPUT Mode:
Press “-” Button + HOME for 2 seconds to enter the 2.4G Search Mode, LED2+LED3 flash quickly
during pairing, and the LED2+LED3 indicators light up when the connection is successful.
2.4G X-INPUT Mode:
Press “+” Button + HOME for 2 seconds to enter the 2.4G Search Mode, LED1+LED4 flash quickly
during pairing, and the LED1+LED4 indicators light up when the connection is successful.
2.4G Android Mode:
Press “-” + HOME Button for 2 seconds to enter the 2.4G Search Mode, LED2+LED3 flash quickly
during pairing, and the LED2+LED3 are constantly ON when the connection is successful.
2.4G PS3 Mode:
Press L Button + HOME for 2 seconds to enter the 2.4G Search Mode, 4 LED indicators flash quickly at
the same time, and the successful connection is indicated by the system assigned channel indicator.
Remark: 2.4G Dongle receiver is optional and not a standard accessory!
2.
Connect-back Mode
Press the HOME Button for 1 second to wake up the Controller, and it will automatically connect to the
paired system after waking up. If the connect-back is not successful in 10 seconds, it will sleep automatically.
Pressing other Buttons does not have a wake-up function.
3.
Charging Indication
When the Controller is turned off, the LED1-LED4 mode indicator lights flash slowly while charging, and
the LED is OFF when fully charged.
Low Battery Voltage Alarm: The current mode indicator flashes (flashing quickly); the current mode
indicator flashes (flashing slowly) while charging, the current mode indicator is constantly ON when fully
charged; when pairing, reconnecting, charging or low battery, the pairing and reconnection LED indicator has
priority.
4.
Automatic Sleep / Controller On and OFF
The System Screen is OFF, Controller Automatic Sleep; if there is not any button pressing action within 5
minutes, it will sleep automatically (including Sensor action). In Bluetooth Mode, press the HOME Button for 5
seconds to turn off and disconnect from the system; short pressing the Pairing Button can turn off the
Controller directly; short press the HOME Button for 1 second to wake up the Controller.
5.
Low voltage alarm
When the power level of the Controller is low, the current mode indicator flashes to prompt low
power. If the Controller is continually used until the voltage of Controller is at a certain value, the
Controller will enter the sleep state automatically.
（7）
（8）