User Guide

28
7.2.1 Feature information
Please refer to table notes column regarding which features are currently supported in SW.
7.2.2 MIPI DSI 1
The secondary high speed connector supports a 4-lane MIPI-DSI bus.
7.2.3 I2C {CCI_0,CCI _1, SSC_2}
The secondary high speed connector supports two I2C busses.
●
CCI_I2C_0
● CCI_I2C_1
These busses can also be used as generic GPIOs.
7.2.3 SPI {SSC_1}
The secondary high speed connector supports one SPI bus- SSC_SPI_1.
This bus can also be used as generic GPIOs.
7.2.4 Other signals on Secondary High Speed Connector
Other signals include
●
1.8V supply
●
DC_IN 6.5V to 18V with up to 500mA maximum per pin on two pins
●
CAM_MCLK1(APQ-GPIO14)