User's Manual

External Battery with LED

Installation

① Unscrew the sealing metal cover of the waterproof connector of the

intelligent underwater robot counterclockwise. Match the slot of battery

to the slide rail in the bottom of the host. Slide the battery according to

direction indicated by the arrow.

② Push the tail lock to the right to lock the position of the support, the

bearing does not move back and forth.

③ Push the lock in place, install the screws to locate.

④ Insert the connector of the battery into the waterproof connector.

Tighten it clockwise.

Note: The connector has an anti-reversal insertion design, please pay

attention when inserting, please do not rotate when inserting, to avoid

damage to the pin and its internal structure.

①

③

④

②