User's Manual

Accessory Buoyancy Block Installation

① Align the mounting hole with the hole on bracket, with the arrow of

buoyancy block upward.

② Install the wing screw through the hole, insert from the outside to the

inside, and tighten the nut by hand.

Note: External battery needs 4 blocks; other devices do not need

to install buoyancy blocks.

Underwater Gripper

Installation

① Match the mounting bracket of the underwater gripper to the mounting

hole at the bottom of the host, and fix with screws.

② Insert the connector of the underwater gripper into the extension port,

and tighten it clockwise.

Device

After underwater gripper plugged in, APP will automatically identified

and showing the icon on the interface, it can operate by click the icon.

III. T1 Pro Special Accessory Guideline

②

①

②

①