User Manual

Scan the passage
Use a walkie-talkie to scan the active channels. When a signal is
detected, the radio will stay on that channel for five seconds, and
when there is no signal transmission on that channel, the radio will
continue to scan
To turn on channel scanning
1. Press 3 to 4 seconds into the scanning mode;
2. Press PTT/MENU Turn off scan mode
Note: During the scanning process, press ▲/▼ to change the scanning
direction
Safety and precautions
1. Consult your doctor before use if you are carrying any kind of personal
medical device.
2. To avoid the risk of burns, do not use the device if the antenna is
damaged in any way.
3. Never use the device near the radio to avoid interference.
4. Position the transmitter and antenna at least 5cm from your Mouth.
5. The device cannot be used to contact emergency services.
Technical specifications