User Manual

The battery meter
1. means the battery is fully
2. means the battery is low
Turn on/off the intercom
1. To turn on the intercom, hold it down for 3 second MENU
2. To turn off your intercom, press again for three seconds
Adjust the volume
1. Press ▲ to turn up the volume
2. Press the ▼ button to turn down the volume
3. The loudspeaker volume is displayed on the LCD screen, with
(01-08) levels
Set the channel
1. Turn on the walkie-talkie and press MENU to select channels
2. Press ▲/▼ to set channels
3. Press PTT to save channel Settings
To communicate, all walkie-talkies in the group must be set to the
same channel and the interference cancellation code. Hold the
intercom 2--3 inches away from your mouth and speak directly
into the microphone. Don't cover the microphone when you're
talking, and when you're finished, release the PTT (press talk,
release listen)
features
Interference cancellation code
Through the selection of code combinations, the performance of
the computer is enhanced. Channel setting code 1. Press MENU
key until the code starts flashing
2. Press ▲/▼to select the code 0-99 or 99-0
3. Press PTT to save code Settings