Users Manual
Table Of Contents
- 1.The Repeater System.1
- 2.Package Contents.2
- 3.Installation.3
- 3.1.Installation of Outdoor Antenna 6
- 3.2.Installation Location Requirement..11
- 3.3.Cable Layout and Connector Assembly14
- 3.4. Switch on the Power15
- 3.5. Check Coverage.15
- 4.Attention.18
- Q5: Phone calls and Internet access are in poor qu
- - A.Adjust the direction of outside antenna and ke
- - B.Re-route the cable from outside antenna to boo
- -C.Verify the distance between outside and inside
- Q6. Cell phone signal is improved but the coverage
- - A.Adjust the angle of inside antenna.
- - B.Verify the place mounting outside antenna rece
- - C.Tighten all cable connections.
- Q7. How to register the booster with Serial Number
- Not all of consumers require to register the boost
- Step 3: Fill in your Location information and Bo
- 空白页面
- 空白页面
- 空白页面
3
Step 1: Connect Inside Antenna To Booster
Option A：Mount the Indoor Ceiling Antenna
Installation Steps:
1. Drill a 20mm diameter hole in the ceiling. The ceiling thickness should be
30mm maximum.
2. Unscrew fixing nut from the antenna. Place antenna cable through the hole.
Screw the fixing nut back onto the antenna, and go through the cable from the
crawl space side of the ceiling and fasten.
3. Attach the connection from the indoor antenna to the connector labeled
INDOOR on your booster.
4. Tighten fixing nut to secure antenna (do not over-tighten).
Note:The Ceiling Antenna is suitable for central locations with 360-degree
coverage, please mount it on the ceiling in a central location.
3. INSTALLATION