Users Manual
Table Of Contents
- 1.The Repeater System.1
- 2.Package Contents.2
- 3.Installation.3
- 3.1.Installation of Outdoor Antenna 6
- 3.2.Installation Location Requirement..11
- 3.3.Cable Layout and Connector Assembly14
- 3.4. Switch on the Power15
- 3.5. Check Coverage.15
- 4.Attention.18
- Q5: Phone calls and Internet access are in poor qu
- - A.Adjust the direction of outside antenna and ke
- - B.Re-route the cable from outside antenna to boo
- -C.Verify the distance between outside and inside
- Q6. Cell phone signal is improved but the coverage
- - A.Adjust the angle of inside antenna.
- - B.Verify the place mounting outside antenna rece
- - C.Tighten all cable connections.
- Q7. How to register the booster with Serial Number
- Not all of consumers require to register the boost
- Step 3: Fill in your Location information and Bo
- 空白页面
- 空白页面
- 空白页面
2
1.Signal Booster 2.Indoor Antenna
3.Outdoor Antenna 4.50 ft Outside Coaxial Cable
5. Power Adapter 6.16 ft Inside Coaxial Cable
7.User Manual 8.Screws Accessories
You should receive the Mobile Booster kit which includes the similar
above-mentioned fittings. Before installing, please confirm your purchased
booster’s frequency is corresponding with your cell phone frequency; if not
corresponding, the booster would not amplify any signal.
Commonly-used operator’s frequency is as follows:
Band
Uplink (UL) Downlink (DL)
UL_low – UL_high DL_low – DL_high
2
1850 MHz 1910 MHz 1930 MHz 1990 MHz
4
1710 MHz 1755 MHz 2110 MHz 2155 MHz
5
824 MHz 849 MHz 869 MHz 894 MHz
12
698 MHz 716 MHz 728 MHz 746 MHz
13
776 MHz 787 MHz 746 MHz 757 MHz
2.Package Contents