Users Manual
Table Of Contents
- 1.The Repeater System.1
- 2.Package Contents.2
- 3.Installation.3
- 3.1.Installation of Outdoor Antenna 6
- 3.2.Installation Location Requirement..11
- 3.3.Cable Layout and Connector Assembly14
- 3.4. Switch on the Power15
- 3.5. Check Coverage.15
- 4.Attention.18
- Q5: Phone calls and Internet access are in poor qu
- - A.Adjust the direction of outside antenna and ke
- - B.Re-route the cable from outside antenna to boo
- -C.Verify the distance between outside and inside
- Q6. Cell phone signal is improved but the coverage
- - A.Adjust the angle of inside antenna.
- - B.Verify the place mounting outside antenna rece
- - C.Tighten all cable connections.
- Q7. How to register the booster with Serial Number
- Not all of consumers require to register the boost
- Step 3: Fill in your Location information and Bo
- 空白页面
- 空白页面
- 空白页面
12
3.2 Installation of Outdoor antenna
The repeater’s main function is improve weak RF signals of an area. A simple formula:
Input power+ Gain=output power. The signal strength from the outdoor antenna directly
affects the efficiency of the indoor coverage. it is very important to choose the outdoor
antenna location in order to get the best signals.
Testing the signal strength received from outdoor antenna by mobile phone:
Select an outside antenna location on the roof of the building to install the outdoor
antenna, using a cell phone to find the strongest signal from the cell tower.
The phone calls or data transmission shall be smooth and stable by 3 times testing in
location
Fix the outdoor antenna after selecting the best position, and adjust height or angles
slightly in order to get the best signal with suitable input power level and calling quality.
Test the call quality of Outdoor antenna (for professional installation team only）