Users Manual
Table Of Contents
- 1.The Repeater System.1
- 2.Package Contents.2
- 3.Installation.3
- 3.1.Installation Location Requirement.14
- 3.2.Installation of Outdoor Antenna.15
- 3.3.Cable Layout and Connector Assembly17
- 3.4. Switch on the Power18
- 3.5. Check Coverage.18
- 4.Attention.20
- Q5: Phone calls and Internet access are in poor qu
- - A.Adjust the direction of outside antenna and ke
- - B.Re-route the cable from outside antenna to boo
- -C.Verify the distance between outside and inside
- Q6. Cell phone signal is improved but the coverage
- - A.Adjust the angle of whip antenna.
- - B.Verify the place mounting outside antenna rece
- - C.Tighten all cable connections.
- Q7. How to register the booster with Serial Number
- Not all of consumers require to register the boost
- Step 3: Fill in your Location information and Bo
3
Step 1: Connect Inside Antenna To Booster
Option A
:
Mount the Whip Antenna
Installation Steps:
1.Connect the whip antenna to the Booster INDOOR port.
2.Gently rotate the whip antenna, place Inside Antenna in weak signal area.
Note:
1. The whip antenna is suitable to be installed in small room or apartment.
2.The whip antenna should be oriented vertically whether you choose
to mount the booster on a wall or set on a table.
3. INSTALLATION










