Users Manual
Table Of Contents
- 1.The Repeater System.1
- 2.Package Contents.2
- 3.Installation.3
- 3.1.Installation Location Requirement.14
- 3.2.Installation of Outdoor Antenna.15
- 3.3.Cable Layout and Connector Assembly17
- 3.4. Switch on the Power18
- 3.5. Check Coverage.18
- 4.Attention.20
- Q5: Phone calls and Internet access are in poor qu
- - A.Adjust the direction of outside antenna and ke
- - B.Re-route the cable from outside antenna to boo
- -C.Verify the distance between outside and inside
- Q6. Cell phone signal is improved but the coverage
- - A.Adjust the angle of whip antenna.
- - B.Verify the place mounting outside antenna rece
- - C.Tighten all cable connections.
- Q7. How to register the booster with Serial Number
- Not all of consumers require to register the boost
- Step 3: Fill in your Location information and Bo
2
1.Signal Booster 2.Indoor Antenna
3.Outdoor Antenna 4.50 feet Coaxial Cable
5.Power Adapter 6.User Manual
7.Screws Accessories
You should receive the Mobile Booster kit which includes the similar
above-mentioned fittings. Before installing, please confirm your purchased
booster’s frequency is corresponding with your cell phone frequency; if not
corresponding, the booster would not amplify any signal.
The Dual Band operator’s frequency is as follows:
Band
Uplink (UL)
Downlink (DL)
UL_low – UL_high
DL_low – DL_high
12
698 MHz
716 MHz
728 MHz
746 MHz
13
776 MHz
787 MHz
746 MHz
757 MHz
17
704 MHz
716 MHz
734 MHz
746 MHz
2.Package Contents