User's Manual

P a g e | 9
Need Help? Get FREE USA-based technical support direct from PalmVID
Call 800-618-7491 or email [e-mail]
8. At the top of this screen, tap “QR
Code” and select “AP Mode”.
When this camera is in its setup
mode, the status LED on the
bottom will flash blue once per
second. If you do not see this
flash, press and hold the reset
button on your Camera for 10
seconds.
Once the blue light flashes
slowly, check the box next to
“Make sure the indicator is
flashing quickly or a prompt tone
is heard”, and tap “Next”