User's Manual

Installation
1. Plug the power adapter into the socket.
2. USB cable connects the power adapter.
3. Put connects the USB-C Interface.
4. Put the mobile phone which supports wireless charging function
on the launch plate correctly. Indicator light changes to green
from blue if it starts to charge. The light will be blue if you remove
the mobile phone, which means the wireless charging pad enters
in a standby mode.
Please read the instructions before using the product
3-IN-1 Magnetic
Wireless Charging Station
User Manual
Indicating status and protection function
1. LED blue light: Standby
2. LED green light: Charging
3. Blue light flashing: Mobile phone location in deviation or over
temperature protection or trigger FOD
* The involved images are sketch maps , the final product as per the material subjects.
Important notes
1. Please remove the protective case (except receiver case) when
charging, to keep high eciency. We suggest you use a 3A adapter for
the best results.
2. Do not disassemble the charger or throw it into fire and water, to
avoid causing a short circuit leakage.
3. Do not use wireless charger in severely hot, humid or corrosive
environments, to avoid circuit damage and occurs leakage
phenomenon.
4. Do not place stu with magnetic strip or chip (ID card, bank cards,
etc ) on wireless charging pad to avoid magnetic failure.
5. Please keep the distance at least 20cm between implantable
medical devices (pacemakers, implantable cochlear,etc.) and the
wireless charger, to avoid potential interference with the medical
device.
6. Please take care of the children and ensure they won't play the
wireless charger as a toy, to avoid unnecessary accidents.
7. It is better the mobile phones or other related machines don’t set the
vibration mode,as the vibration will cause deviation and eect the
charging experience .
8. Please read the manuals calfully before charging,this product can
not be ensured to be compatible with the functions of all the machines.
Warranty
There is one year guarantee for this product unless anthropogenic
factor.
Packing List
3-IN-1 Magnetic Wireless Charging Station
User Manual
Type-c cable
65*90ＭＭ 128克铜板纸
Parameter specification
Model: HM37
Input: DC9V/3A, 5V/3A
Mobile phone output: 15W Max
Earphone output: 5W Max
Watch output: 3W Max
Eciency: ≥75%
Wireless charging
position for watch
Indicator light
Wireless charging
position for earphone
Wireless charging
position for phones