Quick Start Guide

Follow the instructions on the app for IMU 6-direction calibration.
IMU 6-direction calibration
Hover Flight Modes
A. Optical ow mode: Enabled when aircraft altitude is below 3 meters.
There are three ight modes during aircraft hover:
Phase 2: When the front LEDs start to blink quickly, keep the aircraft nose
pointing upward and rotate the aircraft by 3 turns until the front LEDs
become solid. Then the calibration process is complete.
*Note: If the front LEDs start to blink slowly during phase 2, it means that
the calibration does not pass. Calibration should restart all over.
22
Extend all arms and landing supports.
Place the aircraft on a still and level surface.
IMU 6-direction calibration
Click "OK" button to ash the indicator light.
Calibrate the next side after ash.
Calibration completed than this dialog automatically disappears
OK