Quick Start Guide

Power on the aircraft and the remote controller. The remote controller
will search for the aircraft automatically. The remote controller beeps
until connection is successfully established.
On the mobile device, open the WIFI settings and locate the hotspot
with SSID: STA-DIVA_XXXXXXXX. Key in the password 1234567890 to
establish WIFI connection with the DIVA devices.
Finally, open FUNSNAP 2 App and enter ‘Device’ page. Swipe to choose
DIVA. Tap ‘connect device to enter the ight screen. If the app prompts
that the aircraft is not found, follow the guide in the app to connect to
the aircraft before re-entering the ight screen.
The DIVA devices should be activated before use for the rst time. To
activate the DIVA devices, connect DIVA App to the devices. Upon
successful connection, an activation prompt will pop up on the DIVA
APP. Follow the onscreen instructions to activate the devices before
use.
FUNSNAP 2 APP
Activating Device
Connecting Device
Device not
ot
D
evice n
䘯鸟徾⸓慨崞
An inactive device has been detected. Are you sure
you want to activate the device? Activated
successfully,After that, returns will not be supported.
15