User's Manual

831 USER MANUAL
24
5.11 System:
Online Upgrade: If you have the latest software, there will be tips <Update> click
update, the camera will be online software upgrade, after the upgrade is
successful will re-start the Camera.
Restore the factory settings: The user
can click the "Restore" button, will pop up
on the right
Diagram tips. When the "Save network
device" checked, the point is determined,
in addition to
Network setup parameters retained, the
other parameters are restored to the factory settings back;
When the "Save Network Device" is not checked, the point is determined, all
camera parameters
Few are restored to factory settings back, equivalent to click the RESET button.
Reboot: Click the reset button after the restart of the camera.