User's Manual
Table Of Contents
- 812 USER MANUA
- 1. Introduction
- 2. Installation
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 3. Homepage
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 3.4 Image settings and PTZ control
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 4. Information
- 812 USER MANUA
- 5. Management
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 812 USER MANUA
- 6. Troubleshooting
- 812 USER MANUA
- 7. Wireless Infrastructure
- 8. Wireless Security
Cloud ip camera web client user manual
26
Repair: If "Playback" cannot see video file or view the alarm information, can
repair the micro SD card. (Note: The repair function may cause part of the micro
SD card contents lost)
Uninstall: put micro SD card from the camera release
Click Apply to save your changes.
812 USER MANUA
5.8Camera alarm arming settings:
I / O Alarm input: When normally open, alarm input port connect with an external
alarm sensor (such as door sensor, infrared, smoke alarm detector, etc.) must be
a normally open alarm probes. When alarm occurs, the probe switch is closed;
network cameras generate alarm triggers, alarm calls according to user settings.
Adjust the
sensitivity
Apply