Specifications

1.Enable the bluetooth of the phone and then turn on the APP
2.Long press the on-off key for 3 seconds, the indicator light
blinks and the product begins to work.
3.After the APP indicating that the bluetooth is successfully
connected with the detector, the indicator light of the skin
detector will be on for a long time.
4.Take down the dust cover, gently keep the detection window fits
perfectly on the skin. The detector begins to work after a sound
of “beep” and detection finishes after two sounds of “beep
beep” 3 seconds later.
5.view the detection data shown on the APP screen
6.To clean the metal probe and inspection window, fit the dust
cover back
1.This product is powered by a CR2032 button battery.
2.Push back the battery cover in the direction indicated on the battery
cover, insert a CR2032 button battery according to the “+/-“ mark
3.Install the battery cover.
1.After using the skin detector, clean the metal probe and test
window with a clean paper towel or dry cloth.
2.Please do not place the product in a humid or high-temperature
environment. Please properly place it in a dry, ventilated place
at normal temperature.
3.If the product is not used for a long time, please clean it up
and keep it in a sealed and dry environment.
4.Remove the battery if the product is not used for a long time.
5.When disposing of products, please do not put them together
with ordinary household garbage. They should be sent to the
recycling station designated by the government for the benefit
of environmental protection.
If there is any fault during operation, please check below. If the
problem cannot be solved or the product still cannot be operated
properly, please contact IMATE after-sales service center directly.
Please do not disassemble and try to repair by yourself.
The warranty period for IMATE products (free of charge) will be
implemented from the date of purchase.
1.Products within the warranty period can only be guaranteed
at the designated maintenance point of IMATE; Please show
this warranty certificate and purchase certificate for warranty.
Special attention should be paid to the following two points:
a. This warranty certificate will not be reissued after it is lost.
Please keep it properly.
b. This warranty is only valid in the People's Republic of China
(Hong Kong, Macao and Taiwan are not available for the
time being).
2.The warranty period of this product is one year from the date
of purchase, and it is guaranteed in the case of failure in
normal use.
a. Consumables, plastic accessories, complimentary accessories
and other consumables are not covered by the warranty.
b. Free warranty service does not include freight and on-site
service charge for maintenance personnel.
c. Provide paid maintenance service after the warranty period.
3. Our company shall bear the cost of round-trip postage if the
product has any quality fault within seven days after purchase.
The customer pays the postage in advance. After the product
maintenance, our company will arrange to return the postage
paid by the customer.
4. Under any of the following circumstances, even within the
warranty period, it is not entitled to free warranty, but it can
be repaired with fees:
a. Normal wear and tear of the product, including cracks,
scratches, wear, discoloration or fading, etc.
b. Damage caused by failure to use, maintain or keep the product
in accordance with the instructions.
IMATE SKIN DETECTOR
THANK YOU FOR CHOOSING IMATE SKIN DETECTOR.
Please read this manual carefully and keep it properly for
future reference before using this product.
PARTICULAR NOTES APPLICATION METHOD CARE AND MAINTENANCE
FAULT ANALYSIS AND REMOVAL
WARNINGS：
PARAMETER & QC
WARRANTY CARD
STEPS
PRECAUTIONS FOR SAFE USE
1. All the contents of this manual have been carefully
checked. If there is any printing error or misunderstanding
on the content, please give correction and keep
communication. Our company reserves the right to interpret.
2. Products are subject to change without prior notice.
May IMATE portable beauty instrument brings you simpler,
more comfortable, efficient and fashionable beauty
care experience.
To ensure proper use of this product, please read all safety
precautions carefully before use. This safety note can help
you with using this product correctly to avoid personal injury
or property loss to you or others. The contents of safety
precautions are as follows, please follow the relevant
provisions of safety precautions!
PROHIBITION!
1. For the following persons, please do not use this product.
Children
Women who are pregnant or menstruating or lactating
People suffering with allergies
People suffering with skin trauma, eczema, swelling,
skin problems, atopic dermatitis, or skin sensitivity
People suffering with psychological problems
People suffering with fever and other physical
abnormalities, heart disease, serious disease, acute
disease, malignant tumor, tuberculosis disease,
blood disorders and other symptoms.
2.Do not use on areas around the eyes, eyeball, wounds,
plastic surgery, the top of the heart.
3.Do not use diluent, benzene or other solvent to clean
or wipe the product.
4.Do not immerse this product into water or other liquids
5.Do not put the product near the fire source, heat or
use or place it in a high temperature environment.
6.Do not drop or collide this product to avoid damage.
In case of damage caused by collision or fall,
please do not use it again.
7.Do not modify, dismantle or repair the product by yourself.
For maintenance, please contact the store where you
purchased the product or the maintenance point
designated by IMATE.
8.Please stay away from strong electromagnetic fields
(such as induction cooker) when using this product.
9.Do not use accessories which are not produced or
recommended by our company.
10.Do not use the product with wet hands. Please use
it when your hands are dry, otherwise it may cause
power short circuit.
ATTENTION!
on-off key
battery cover
Indicator light
Indicator light
Enable the bluetooth of
the phone and the APP
Short press the on-off key
metal probe
dust cover
detection window
Scan the code Select mobile platform
Android System
Iphone System
1. Scan to download APP
Note: Support bluetooth 4.0
Support IOS 8.0 and higher versions
Support Android 4.3 and most phone models with higher versions
Fault phenomenon Cause analysis Fault removal
Unable to build
connection
Unable to build
connection
Data differs while
testing the same
part for several times
Indicator light does
not brighten
The battery
capacity drains
Replace a new battery
The pressure
varies while each
detection
To gently keep the
detection window fits
perfectly on the skin
The bluetooth is
not on
Communication
data error
To turn on the Bluetooth
of the phone
Close the APP background
and restart the APP
Product name
Product model�
Battery specification
Rated power
Product material
Product dimensions
Product weight
Executive standard�
Country of origin
Inspection
Skin Detector
M-6601
DC3V button battery CR2032
0.3W
ABS
L123*W27*D17mm
42g
GB 4706.1-2005
China
c. Damage caused by transportation, falling or other man-made damage.
d. Damage caused by unauthorized demolition without the
designated repair point by IMATE.
e. Fail to present this warranty certificate and valid purchase certificate.
f. The information recorded on the warranty certificate is inconsistent
with or altered from the physical identification of the commodity.
g. Damage caused by force majeure factors (such as lightning,
earthquake, fire, flood, etc.).
5. This warranty is only applicable to the field purchased and
used by consumers for the purpose of daily consumption. It
is not suitable for industrial and commercial use.
【Product information】
Skin detector
Product name:
Country of origin: China
Product model: M-6601
Manufacturing serial number:
SALES RECORD（FAILURE TO FULLY DOCUMENT THE
FOLLOWING INFORMATION MAY NOT BE WARRANTED）
Sales date
Customer name
Customer address
Store name
Store address
Sales voucher number
Contact number
Postal code
Store number
Postal code
MAINTENANCE RECORD
Repairing date
Contact number
Maintenance
station address
Fault content
Maintenance
content
Signature of
maintainer
Name of maintenance station
Postal code
Fault cause
Delivery acceptance date
This warranty certificate contains consumer's personal information.
Please keep it by yourself.
IMATE(International) Beauty Technology Group Co. Ltd
Manufacturer:Shenzhen Fuhengtong Technology Co. Ltd
Factory address:3rd Floor, No.16 of No.4 industrial zone,Changzhen community, Gongming
street,Guangming new district, Shenzhen
National service hotline: [phone]
Official brand website: www.imate.me
1.Please check if there is any obvious damage before using
the product. If there is any damage, please do not use it.
2.Keep out of reach of children.
3.The pressure may affect the detection data. It is advisable
to gently keep the detection window fits perfectly on the skin
4.Do not shake for 3 seconds during detection
PRODUCT COMPONENT
POWER SUPPLY INSTRUCTION
beep
blue light
swarthy natural fair
Operate according
to the sound
data analysis
white degree
Skin moisture
Note: IMATE reserves the right to modify the warranty
terms and conditions without prior notice due to
thecontinuous upgrading of the service.
Install the battery
Push back the
battery cover
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.