User's Manual

2) Off current: 0uA， maximum trigger current : 1.2mA
4. Operating Instructions
1)wireless trigger synchronously:
①Turn on the transmitter, switch to ON, then press the test button on it, if the
indicator light blinks, that means it is working;
②install transmitter on the socket of the camera, transmitter will trigger
signal through the camera's shutter release;
③transmitter can trigger receiver after encoding.
2)ALL frequency gear:
Turn the transmitter's power switch to "ALL" gear, the transmitter and
receiver can work at any channel selecting switch position, then it can trigger
the receiver.
3)The transmitter will take the PC cord to connect the PC socket of camera,
it makes transmitter send signals by pressing the test button or camera.
5. Precautions:
1)This product belongs to the accessory of electronic product, maybe Because
of the external environment factors, there is something wrong with the
cameras, but it is a small probability event, do not panic.
2)please turn off the transmitter if it is unused.
3)Don't put it in the high temperature places, such as the Enclosed vehicles
and the control panels.
4)keep dry: Don't touch the product with wet hands, and it may be malfunction
if immersed in or exposed to water.
5)Don't use it in the places where the materials can easily get fire and
explosion.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Contact Tel : [phone]
Contact Fax : [phone]
E-Mail: [e-mail]
Page 2 of 2