User's Manual

1st IF: 21.4MHz
2
nd
IF: 455KHz
Audio distortion: ≤3％
Adjacent channel selectivity: ≥65dB
Adjacent channel power: ≥65dB
Output Power: ≤1.5W
Frequency Stability: ±5ppm
Channel Spacing: 25KHz
Frequency deviation: ≤5KHz
Spurious rejections: ≥70dB
Relative humidity: 95％ RH non-condensing
Ambient
temperature: -20～55℃
DC Voltage range: 10V～12.8V
Maximum current: ≤2A
Stand-by current: ≤120mA
Power-off current: ≤0.1mA
FCC Compliance Statement
This equipment has been tested and found to comply with part 90 of the FCC Rules.
Modifications not authorized by the manufacturer may void user’s authority to operate this
device.
Safety and Training Information
ATTENTION: Restricted occupational use to satisfy FCC RF exposure limits.
This radio is NOT intended for use by the “General Population”. It has been designed
for and classified as “Occupational Use Only”, which means it must be used only
during the course of employment by individuals that are aware of the hazards, and the
ways to minimize such hazards.
Radio intended for occupational service only required
training is in the instruction manual which must be reviewed prior to operation.
This radio has been tested and complies with the FCC RF exposure limits for
“Occupational Use Only”.