User's Manual

Shenzhen Friendcom Technology Development Co., Ltd.
8
4.1 Hardware Installation
To apply PC software to radio application, FC-302 QuickSet En v0.1.12, programming cable, programming kit
and PC are needed. In this chapter, instruction for connection of the equipment will be illustrated.
4.1.1 System Requirements
Computer
Normal personal computer or faster (recommended)
Operating System
Microsoft Windows XP & Windows 7
Communication Port
One available communication port (COM1, 2, 3 or others)
Hardware Accessories
Programming cable(RS232 to USB)
Programming kit
4.1.2 Connecting to Data Radio
Connection between the PC and the radio for parameter setting
The programming kit is used for connection as shown below.
No. Descriptions
1 DB15 connector, Connected radio with the programming kit
2 Power Supply (DC 12V)
RS232 Interface, Connected to PC via RS232 serial cable or RS232 to USB cable
The position of the jumper:
For radio’s parameter setting, user should put the jumper on the position shown as below.
3