Instruction Manual

13
Product Usage / Robot Charging
Place the Charging Dock on a hard, level surface and
against a wall. Remove objects within 1.5 ft/0.5 m on both
sides and within 3 ft/1 m in front of the Charging Dock.
C
C
D
W
L
N
5
Robot returns to the Charging Dock at the end of a cleaning
cycle or when its battery is running low
Plug the adapter into the a wall outlet and plug the DC jack into
the DC socket of the Charging Dock.
When the Charging Dock connects to AC power, the LED
indicator on the Charging Dock is flashing green.
Caution:
Do not explode Charging Dock with direct sunlight or any
strong reflection on light source. If cannot be avoided,please
cover the bottom part of Charging Dock about 7 cm.
Recommend to fully charge the robot to ensure operating
time.
Avoid to have Water Tank inserted in robot when charging.
Avoid to have wet mopping cloth in which may damage
wooden floor.
T
Install the Charging Base in a location that Robot
can easily access. Please place the Charging Base
against a wall, and on a hard-level surface rather
than on rugs or carpets.
- Always keep the Charging Base plugged in,
otherwise Robot will not automatically return to it.